d&b E12X (D25/5D/25D/D40/D80/D90/40D amps)
A passive subwoofer, 1 x 12 in LF, bass reflex. The figures below have not yet been checked against the datasheet.
Unverified data. Entered from the manufacturer’s page. Check the datasheet before relying on it.
Place it in the plannerSpecifications used
| Maximum level | 127 dB peak at 1 m |
|---|---|
| Power | 300 W (RMS; 1600 W peak (10 ms)) |
| Pattern | omni |
| Frequency range | 45 Hz to ? Hz (-5 dB on axis, standard; 45 to 140 Hz in 140 Hz mode (upper limit 100 Hz as printed; field omitted because validator minimum is 1000 Hz)) |
| Weight | 18 kg |
| Size (w × h × d) | 530 × 358 × 448 mm |
| Pole socket | Yes |
| Source | Manufacturer page (2026-10-10) |
How the level was stated. 1 m, free field, peak SPL, pink noise crest factor 4, one speaker driven; may deviate with several loudspeakers. Figure depends on amplifier.
Notes. Page states omnidirectional dispersion. M20 threaded flange on top for the d&b stand winder (no pole-mount rating printed). Dimensions printed H x W x D 358 x 530 x 448.
What the figures mean at distance
Taking 127 dB at 1 m on axis and the free-field rule of 6 dB lost per doubling of distance, this is the most the speaker can reach at each distance. A real room adds reflections, and a speaker is not normally run at its maximum.
| Distance | Level on axis |
|---|---|
| 2 m | 121.0 dB |
| 5 m | 113.0 dB |
| 10 m | 107.0 dB |
| 15 m | 103.5 dB |
| 20 m | 101.0 dB |
See level and distance and coverage angles for how these are worked out.
Planning estimate only. The calculation ignores reverberation, reflections and room modes. See terms and disclaimer.