Electro-Voice EKX-12P

A powered full-range top, 1 x 12 in LF (EVS-12M) + 1 x 1 in HF titanium compression driver (DH-1M). The figures below have not yet been checked against the datasheet.

Unverified data. Entered from the manufacturer’s page. Check the datasheet before relying on it.

Place it in the planner

Specifications used

Maximum level	132 dB at 1 m
Power	1500 W (amplifier rating (1500 W Class D); type not further specified)
Coverage	90° horizontal × 60° vertical
Frequency range	50 Hz to 20000 Hz (-10 dB range, full space, music DSP preset; -3 dB response 60 Hz - 18 kHz)
Weight	18.8 kg
Size (w × h × d)	375 × 607 × 356 mm
Pole socket	Yes
Source	Manufacturer page (2026-10-10)

How the level was stated. Footnote: measured at 1 m using broadband pink noise at maximum output. Page does not label it peak or continuous.

Coverage definition. Printed as 90 x 60 (H x V, unit mark unclear); the page does not define the angle. Other EKX pages state nominal -6 dB but this page did not.

Notes. No sensitivity printed. Features list aluminum pole mounts plus eight M10 points.

Coverage shape

Horizontal: 90° (seen from above)

Vertical: 60° (seen from the side)

What the figures mean at distance

Taking 132 dB at 1 m on axis and the free-field rule of 6 dB lost per doubling of distance, this is the most the speaker can reach and how wide and high its nominal coverage is at each distance. A real room adds reflections, and a speaker is not normally run at its maximum.

Distance	Level on axis	Coverage width	Coverage height
2 m	126.0 dB	4.0 m	2.3 m
5 m	118.0 dB	10.0 m	5.8 m
10 m	112.0 dB	20.0 m	11.5 m
15 m	108.5 dB	30.0 m	17.3 m
20 m	106.0 dB	40.0 m	23.1 m

See level and distance and coverage angles for how these are worked out.

Planning estimate only. The calculation ignores reverberation, reflections and room modes. See terms and disclaimer.