Electro-Voice EKX-15P
A powered full-range top, 1 x 15 in LF (EVS-15M) + 1 x 1 in HF titanium compression driver (DH-1M). The figures below have not yet been checked against the datasheet.
Unverified data. Entered from the manufacturer’s page. Check the datasheet before relying on it.
Place it in the plannerSpecifications used
| Maximum level | 134 dB at 1 m |
|---|---|
| Power | 1500 W (amplifier rating (1500 W Class D); type not further specified) |
| Coverage | 90° horizontal × 60° vertical |
| Frequency range | 48 Hz to 20000 Hz (-10 dB range, full space, music DSP preset; -3 dB response 55 Hz - 18 kHz) |
| Weight | 24.4 kg |
| Size (w × h × d) | 432 × 685 × 429 mm |
| Pole socket | Yes |
| Source | Manufacturer page (2026-10-10) |
How the level was stated. Footnote: measured at 1 m using broadband pink noise at maximum output. A Chinese-locale page labels the figure "calc", so it may be a calculated value; not labelled peak or continuous.
Coverage definition. Nominal -6 dB per the Chinese-locale page (H 90, V 60); the English page prints 90 x 60 without defining it.
Notes. No sensitivity printed. Features list aluminum pole mounts plus eight M10 points. Passive EKX-15 is a different model (96 dB sens., 132 dB peak).
Coverage shape
What the figures mean at distance
Taking 134 dB at 1 m on axis and the free-field rule of 6 dB lost per doubling of distance, this is the most the speaker can reach and how wide and high its nominal coverage is at each distance. A real room adds reflections, and a speaker is not normally run at its maximum.
| Distance | Level on axis | Coverage width | Coverage height |
|---|---|---|---|
| 2 m | 128.0 dB | 4.0 m | 2.3 m |
| 5 m | 120.0 dB | 10.0 m | 5.8 m |
| 10 m | 114.0 dB | 20.0 m | 11.5 m |
| 15 m | 110.5 dB | 30.0 m | 17.3 m |
| 20 m | 108.0 dB | 40.0 m | 23.1 m |
See level and distance and coverage angles for how these are worked out.
Planning estimate only. The calculation ignores reverberation, reflections and room modes. See terms and disclaimer.